Security Side Gate

 

Security side gate
New security side gate

A house in Marrickville had a timber security side gate to stop access down the side of the house. Being timber it was also impossible to see down the side of the house or see someone who may be wanting to get past the gate.

The owner decided she wanted a steel security gate made that had a similar design to the existing front gate of the property. It would also allow her to see who may be wanting to enter down the side of the house.

A dead lock was needed to fit into the steel support rails so the gate could not be opened without the key.

Exisiting front gate
Existing steel front gate

The existing gate (shown on the left) was used as a basis to develop the full height door design as shown above.

Fitting the dead lock to the steel SHS tubing required inserting 12mm steel plates into the 1.6mm walls of the steel tube so threaded holes could be cut to secure the lock catch attaching screws.

Finished lock attachment plate
12mm steel plate fitted to SHS steel and drilled and threaded for lock catch
securing steel plates
Top and bottom view of 12mm steel plate before fitting to SHS tube

Before and after view of the side security gate

Comparison of old vs new side gate
Before and after security side gate