Concave Table Base

 

Concave base mirror table

Concave base mirror table

A custom concave table base was required on which a large black framed mirror could be mounted. The client wanted a unique display table for their optometrist business. A sturdy design was developed for the base section that blended well with the mirror while maintaining an elegant double concave surface on the base.

White LEDs around the inside edge of the mirror frame were also fitted to illuminate the display area. The table base was constructed of timber and was finished in a high gloss black enamel.

To make the concave surfaces an intricate timber framework was built on which the plywood surfaces could be attached. To keep the weight to a minimum sections of ply were cut from the ply panel components that were not structurally required. This had the added benefit of allowing access inside the base to ensure good adhesive bonding of the edges of the concave surfaces.

Routing the curved profiles for the support structure

Routing the curved profiles for the support structure

Completed internal framework prior to cladding

Completed internal framework prior to cladding

First concave 5mm bendy ply section attached

First concave ply section attached

Cladding in ply completed

Cladding in 5mm bendy ply completed

The LED strips around the inside edge of the mirror were powered by small battery packs fitted in recesses under the mirror in the base section. The LEDs were divided into two sections with a battery pack fitted either end of the table base.

Side view of concave table in shop

Side view of concave table in shop

View of the mirror top showing LED strips

View of the mirror top showing LED strips

Leave a Reply

Your email address will not be published. Required fields are marked *