Abstract display tree
The tree consists of two hinged MDF half sections that fit into a steel alignment bracket on the floor which makes it very stable once erected. Each quarter panel of the tree was laser cut in 18mm MDF from four different DXF files. The two quarter sections of each half section are attached together by hinges. Each half is free standing when it is opened up to 90 degrees.
After each half is opened out to 90 degrees is fits into the steel alignment star as shown in the photos below.
The two folded MDF sections ready for transport
Alignment brackets for the folding halves of the tree
First half fitted into bracket
Another view of the first half in the bottom bracket
Second half fitted into base bracket
View of top locating bracket
Hi there,
We are an events company based in Melbourne. Interested in a few props for our events. Can you please provide a rough estimate for a few things – we don’t want to waste your time, we can’t afford it.
For example – Horse, Lolly , candy etc
Please advise.
Kind regards, Aparna
How much is the tree prop?
Hi Robyn,
Thanks for the enquiry.
They are made to order and cost $2200.00 (inc GST)